It is important for the pilot to plan a flight before doing any other activity. After this, you can ask the traffic controllers to tell you about the destination and about the route to that destination. It is necessary for the pilots to file their journey inventor to the control tower service station. You must follow below mentioned instructions for an FAA route review, so that you could do it in the right way.
You must get the flight-plan form from the FAA. Although it is possible to file your case without possessing any copy of this form, but you have to give answers to the different questions that will be asked by the specialists. You must select the kind of your route planner, so that you could be able to file the form.
You must fill the form by putting tail no of aircraft in block 2 and ATC identifier must be written in block 3.you must write your expected airspeed in block 4 and put the departure identifier in block 5.in block 7, first cruising altitude must be mentioned. For instance, you must enter 55 if you are expected a trip at 5500 feet. In block 8, you are required to enter your route of trip. In block 9, there is a place for mentioning the destination airport address. You must be sure about the trip time and write it in block 10.
You can put any comment or request in block 11, so that you could convey your message to the management about any thing. You must confirm the quantity of fuel that is present on the board and then mention this information in block 12.
Block 13 is only for IFR flight plan and must be used by the concerned pilots. Block 14 is for the name of pilot and contact information.
You must write the number of people on the board in block 15. Write color of airplane in block 16 and phone number of destination in block 17.this form must be filled by those pilots who are going to plan a flight.
You must get the flight-plan form from the FAA. Although it is possible to file your case without possessing any copy of this form, but you have to give answers to the different questions that will be asked by the specialists. You must select the kind of your route planner, so that you could be able to file the form.
You must fill the form by putting tail no of aircraft in block 2 and ATC identifier must be written in block 3.you must write your expected airspeed in block 4 and put the departure identifier in block 5.in block 7, first cruising altitude must be mentioned. For instance, you must enter 55 if you are expected a trip at 5500 feet. In block 8, you are required to enter your route of trip. In block 9, there is a place for mentioning the destination airport address. You must be sure about the trip time and write it in block 10.
You can put any comment or request in block 11, so that you could convey your message to the management about any thing. You must confirm the quantity of fuel that is present on the board and then mention this information in block 12.
Block 13 is only for IFR flight plan and must be used by the concerned pilots. Block 14 is for the name of pilot and contact information.
You must write the number of people on the board in block 15. Write color of airplane in block 16 and phone number of destination in block 17.this form must be filled by those pilots who are going to plan a flight.
About the Author:
Looking to find the best deal on plan a flight, then visit www.aviationlive.co.za to find the best advice on plan a flight for you.
No comments:
Post a Comment